How to prepare your spa for winter?

1. Unplug the spa.

2. Drain the water through the drain valve until the spa has no water in it.

3. Remove the filters and throw them away, since if they are not submerged in water for a few days you will not be able to reuse them. You will need to install new filters when you use the spa again.

4. Unplug the pumps - circulation, heater, whirlpool, air, etc., meaning: disconnect the pumps to allow the water to drain from the plumbing to neutralize the risk of internal condensation.

5. Dry the pipes: Any water left in the pipes can be sucked out of the air and water jets through a liquid suction pump. Make sure the spa jets are open before performing this operation.

6. Drain any remaining water from the bottom of the spa.